IM-FAH-Dowflow-0672327-00

1. Remove the connection panel, access panel, and the

blower panel. Keep all panels and screws; these will be

re-used when reassembling.

2. Remove the support bar. Keep the bar and 4 screws for

later use.

3. Remove all upflow and horizontal drain pan mounting

brackets (Figures 4 and 5). Discard these brackets.

4. Carefully slide the coil and the horizontal drain pan

assembly from the air handler cabinet. Discard the

horizontal drain pan.

5. Remove the rear coil support bracket (Figure 6); discard.

REMOVING COIL FROM HOUSING

FIGURE 5

CAUTION

Be certain all power has been disconnected from

the air handler before beginning work.

WARNING

Excessive Weight Hazard - Use two or more

people when moving and installing the unit. Failure

to do so can result in back or other type of injury.

FIGURE 4

Remove Upflow Drain Pan

Mounting Bracket

(18 through 30, and 36)

Remove Horizontal and Upflow Drain

Pan Mounting Brackets

(31, and 37 through 60)

Remove Bracket

Securing Upflow

Drain Pan to Unit

Remove Brackets

Securing Both

Drain Pans to Unit

FIGURE 6

Remove Rear Coil Bracket