IM-FAH-Dowflow-0672327-00

5
MODIFYING INDOOR COIL (CONT.)
5. Wrap the coil suction manifold and TXV bulb with the
provided insulating foam tape (Part H) to prevent
condensate from dripping or blow off the manifold, as
shown in Figure 10.
NOTE: Failure to install all shields (steps 3 and 4), or the adhesive
back insulating foam (step 5) can result in condensate blow-off and
subsequent damage to the building and its contents.
A. Insert insulating foam tape behind suction manifold as
exampled below.
FIGURE 10
Insulating Coil Suction Manifold
B. Remove backing from insulating foam tape to expose adhesive
side as exampled below.
C. Fold insulating foam tape over front of the suction manifold
as exampled below.