IM-FAH-Dowflow-0672327-00

4
MODIFYING INDOOR COIL
1. Remove 4 screws attaching coil to drain pan (Figure 7).
2. Remove the drain pan from the coil and replace it with
the kit-provided insulated drain pan (Part A). Reinstall
the 4 screws.
3. Working from the bottom of the coil, install provided
insulated drain pan drip shields (Part C, two each) as
illustrated in Figure 8. Be sure each is inserted snugly
between the drain pan and slab.
FIGURE 8
FIGURE 9
Installing Outer Coil Slab Shields
4. Install both outer coil slab shields (Part D, two each)
using the provided tie-wraps (Part G, four each) (Figure
9) and secure to return bends on both ends. Ensure the
shields are within 1/4” from the drain pan.
FIGURE 7
Remove Drain Pan
Remove the Four Screws Securing the Coil to the Drain Pan
Insulated Drain Pan Drip Shields
FRONT
BACK