WiFi Module for Ceiling Mount User Manual

Page 12 of 15
Note: if the QR code scan does not work, you have the option of configuring manually. To
configure manually:
• Tap “AC” under choose home appliance type and follow the prompts.
• The prompts will take you to your device’s WiFi settings where you will see
“net_ac_XXXX” as an available network. Tap “net_ac_XXXX” to (temporarily) join and
enter password “12345678”. NOTE: Joining this temporary network is part of the setup
process and will not result in permanent changes to your network.
• Next, your device will automatically revert to your home network, and you will be
prompted to enter your usual home network password. You may see a dialog
prompting you to do this step manually. If so, return to your device’s WiFi settings,
choose your home network and enter your usual home network password.
• Tap OK or Join and you will see the configuration screen as shown below.
• Upon completion you will receive a ‘configuration success’ message and be returned to
the home screen.
NOTE: If the device name does not appear in the home screen after completing
configuration, try swiping down to refresh the list. If it still does not appear, power the
mini-split equipment off and back on and wait 15-30 minutes to try setup again.