PTAC Service Manual

Service Manual
Installation and Maintenance
172
Steps
Procedure
screw
screw
screw
baffle
left side
plate of outer
support
right side plate of outer support
2.Remove middle connection board
3.Remove left and right support sub-assy
Press the 2 clasps of filter to make it
separated from the groove and then pull
the filter outwards to remove it.
Remove the 4 screws fixing the left of
the support and the screw fixing the
baffle; remove the left support and baffle.
Remove the 3 screws fixing the right side
of the support sub-assy and then
remove the right support.
a
b