BMKH MFCC user manual

3
FAN button
Pressing this button can set fan speed circularly as: auto (AUTO), low( ), medium
( ), high( ).
Auto
4
TURBO button
▲
▲/ button
5
● It’s Low fan speed under Dry mode.
● Unde AUTO speed, air conditioner will select proper fan speed automatically
according to ex-factory setting.
Note:
Note:
● For preventing cold air, after starting up heating mode, indoor unit will delay 1~5
minutes to blow air (actual delay time is depend on indoor ambient temperature).
●
Set temperature range from remote controller: 16~30℃(61-86°F);
Fan speed: auto, low speed, medium speed, high speed.
Under COOL or HEAT mode, press this button to turn to quick COOL or quick
HEAT mode. " " icon is displayed on remote controller. Press this button again
to exit turbo function and " " icon will disappear.
If start this function, the unit will run at super-high fan speed to cool or heat quickly
so that the ambient temp. approachs the preset temp. as soon as possible.
auto mode)
● When setting T-ON, T-OFF or CLOCK, press "▲" or " " button to adjust time.
▲
(Refer to CLOCK, T-ON, T-OFF buttons)
● Press "▲" or " " button once increase or decrease set temperature 1
℃
(°F).
Holding "▲" or " " button, 2s later, set temperature on remote controller will
change quickly. On releasing button after setting is finished, temperature indica-
tor on indoor unit will change accordingly. (Temperature can’t be adjusted under
▲
▲
Floor Ceiling Type Unit
5