Installation & Owners Manual 2017

Blueridge Owners Manual

Document Version: 01/2017

• After selecting cool mode, the air handler will operate under cool mode.

Cool indicator “ “ on indoor unit is ON. Press “+” or “-” button to adjust

the set temperature. Press the “FAN” button to adjust the fan speed.

Press “ “ button to adjust the fan blowing angle.

• When selecting dry mode, the air handler will operate in air condition-

ing, but with a low fan speed to remove excessive humidity. Dry indicator

“ “ on indoor unit is ON. In dry mode, the fan speed cannot be adjusted.

Press “ “ button to adjust the blowing angle.

Press this button to turn the air handler on and off. After turning on the air

conditioner, operation indicator “ “ on the indoor unit’s display is ON (green

indicator - the color is different for different models), and the indoor unit will

make a sound.

• When selecting auto mode, the air handler will operate according to am-

bient temperature. The set temperature are 77

F for cooling and 68

F for

heating and cannot be adjusted or displayed. Press the “FAN” button to

adjust the fan speed and press “ “ to adjust the blowing angle.

On/Off Button

MODE Button

Press the mode button to select your required operation mode.

Buttons on Remote Control

AUTO

COOL

DRY

FAN

HEAT

Multizone, 18, 20, and 22 SEER Remotes