Installation & Owners Manual 2017

Blueridge Owners Manual

Document Version: 01/2017

Multizone, 18, 20, and 22 SEER Remotes

1. After connecting the power, press the “ON/OFF” button on remote con-

troller to power up the ductless mini split.

2. Pressing the “MODE” button will select your desired mode: AUTO, COOL,

DRY, FAN, HEAT.

3. Press the “+” or “-” buttons to set your desired temperature. (The tem-

perature cannot be adjusted when the unit is in auto mode).

4. Press the “FAN” button to set your desired fan speed: auto, low, medium,

and high speed.

5. Press the “ ” button to select the fan blowing angle.

Quickstart Operation Guide

NOTE

• When the power is connected (stand by condition), you can

operate the air conditioner using the remote control.

• When the unit is on, each time you press a button on the

remote controller, the sending signal icon “ “ on the display

of remote control will blink once. If the air conditioner beeps,

that means the signal has been sent.

• When the unit is off, the remote will display the set tempera-

ture. Press the light button on the remote and the indoor

unit will display current mode. When the unit is on, both the

remote and the air handler will display current mode.