Installation & Owners Manual 2017

Blueridge Owners Manual

Document Version: 01/2017

15 SEER Unit Remote

Replacement of batteries in remote control

1. Press the back side of remote

controller on the spot marked ” “,

and pull off the battery box.

2. Replace two No.7 (AAA 1.5V) dry

batteries and make sure the posi-

tions or + and - are correct.

3. Reinstall the cover of the battery

box.

NOTE

• During Operation, point the remote controller signal sender at

the indoor air handler.

• The distance between signal sender and receiving window

should be no more than 26 feet, and there should be no ob-

stacles between them.

• Signal may be interfered easily in the room where there is flu-

orescent lamp or wireless telephone; remote controller should

be close to indoor unit during operation.

• Replace both batteries with new AAA 1.5V at the same time.

• To avoid damage to the remote, please remove the batteries if

it won’t be used for a long time.

• If the display on the remote controller is fuzzy or there’s no

display, please replace the batteries

Battery

Reinstall

Remove

Cover of Battery Box

Img 15 | Back of 15 Seer Unit Remote