Installation & Owners Manual 2017

Blueridge Owners Manual

Document Version: 01/2017

15 SEER Unit Remote

SLEEP Button

Under the Cool, Heat, and Dry modes, press the sleep button to engage sleep

mode. Press this button again to cancel Sleep mode. Under the Fan and Auto

modes this function is unavailable.

SLEEP MODE

The unit will automatically adjust to room temperature during your sleep

time. This slight change in temperature will not affect your comfort level due

to natural effects that sleeping has on the body, but it will save on energy

consumption and lower your electric bill. Press the SLEEP button to select

Sleep Mode. The SLEEP icon will appear.

In Cool or Dry modes: The unit will run at current room setpoint for 1 hour.

After 1 hour, the setpoint will increase by 2

F. After 2 hours, the setpoint will

increase by 4

F and maintain this setpoint until Sleep Mode is cancelled.

In Heat Mode: The unit will run at current room setpoint for 1 hour. After 1

hour, the setpoint will decrease by 2

F. After 2 hours, the setpoint will de-

TIMER Button

• Whenever the unit is ON, press the timer button to automatically turn the

unit off (Timer Off / T-OFF) and the H icon will blink. Within 5s, press the

+ or - button to adjust the time for Timer Off. Pressing + or - button once

will increase or decrease the time by 0.5h. Hold the + or - button for 2s

and the time will change quickly. Release the button after your required

set time is reached. Then press TIMER button to confirm the set time.

T-OFF and H icon will stop blinking.