Installation & Owners Manual 2017

Blueridge Owners Manual

Document Version: 01/2017

15 SEER Unit Remote

MODE Button

Pressing this button once can select your required mode circularly as below

(the corresponding icon “ “ will be lit up after the mode is selected):

• When selecting auto mode, the air handler will operate automatically,

according to ambient temperature. The set temps are 77

F for cooling

and 68

F for heating and they cannot be adjusted and won’t be displayed.

Press the FAN button to adjust the fan’s speed.

• When selecting cool mode, the air handler will provide cooling. Press +

or - button to adjust set temperature. Press the FAN button to adjust the

fan’s speed.

AUTO COOL DRY FAN HEAT(Only for models with heating funtion)

• When selecting dry mode, the air handler will run in air conditioning,

but with a low fan sped to remove excess humidity. In dry mode, the fan

speed cannot be adjusted.

• When selecting fan mode, the air handler will only operate the fan. Press

the FAN button to adjust the fan speed.

• When selecting heat mode, the air handler provides heat. Press + or -

button to adjust the set temperature. Press the FAN button to adjust the

fan speed.