User's Manual

7. Stand by time: 75hours

8. Free size for man and woman.

Accessories:

USB charging cable

Basic operations:

1. Power on: Press and hold the power button for 5 seconds, the blue indicator light will flash.

2. Power off: Press and hold the power button until the red indicator light flash.

3. Pairing: Press and hold the power button for 6~10 seconds until the red and blue LED flash

alternately . The motor will vibrate for 7seconds if pairing succeed.

4. Answer a call: Short press the answer call button in cuff badge, the motor will vibrate when

a call comes in.

5. Reject a call: Press and hold the answer button for 2seconds.

6. Redial last number: In the standby mode, double click the answer button to redial the

last outgoing number.

7. Voice dial: In standby mode, short press the answer call button to make a voice call. (this

feature must be available on the mobile phone).

8. Re-connection: Turn on the Bluetooth glove, it automatically connects with the last paired

device(such as a mobile phone)

9. Three-party call: If a new call comes in during answering the call, long press the answer

button to enter the wait mode, re-press the answer button to pick up the new call and make

old call in waiting mode.

10. Battery charge: To recharge the battery, plug in the USB charging cable to a USB device

(computer, laptop, USB-AC charger). When connected to charge, the red LED will be on when

charging. The red LED will turn off once charging is complete. A full charge normally takes

2-3 hours.

Bluetooth Pairing

Bluetooth pairing is a professional terms on the use of Bluetooth products : establish a

wireless connection between Bluetooth-enabled devices through a simple operation.

Pairing steps:

1. Ensure the Bluetooth glove is off.

2. Press and hold the power button for 6~10 seconds until the red and blue LED flash

alternately.

3. Refer to the User manual of your phone to turn on the your phone’ bluetooth function and

search for Bluetooth device.

Usually this can be found in the phone’s Setting Menu. the phone will search for all

available Bluetooth devices within range.

4. Once the phone finds the Bluetooth glove BP-ST126, press it to connect. The motor will

vibrate for 7seconds if pairing succeed.

About battery