User manual

Page 11
www.bluenetvideo.com
BlueNet Video 888-616-1514
Configure your NVS’s TCP/IP settings for network connectivity by selecting Administration Tools
from the main interface and selecting TCP/IP located on the left of the Administration Tools
screen.
4. If prompted for an ID and Password, use “admin” for both entries.
5. The default web port number is 80. If your ISP blocks port 80 you must use a value 1025-30000.
Please consult your ISP and determine if they block TCP port 80.
Case A:
Dynamic IP or PPPoE + Personal Router [Most SOHO]
Configure your NVS’s TCP/IP properties as follows:
Network Type -> STATIC (even though you have Dynamic IP from your ISP, use STATIC on the NVS)
Internet Address -> a private IP address such as 192.168.0.200 [Example]
-you need to assign the NVS an IP address, just as you would assign a PC
- the IP address you assign must be unique to your network as well as match your network
*** for information how to chose a unique IP and match your network please read
the FAQ
-the IP address you assign the NVS must be a private IP
***for information on how to chose a private IP please read the FAQ
Subnet Mask -> 255.255.255.0 [Example]
-you must use the same subnet mask as the one you noted under “Current TCP/IP Settings”
Default Gateway -> 192.168.0.1 [Example]
-this IP address must be the IP address of your router (private or LAN side)
-use the same Default Gateway you noted under “Curren TCP/IP Settings”
This box signifies areas of your network that you can’t
control. Only the ISP has access to these devices.
Phone Line
or CATV
Internet
DSL/Cable Modem
(ISP Proveded)
Personal
router
w/Integrated
Switch
NVS
PC