User`s manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Basic Setup
- Chapter 3 Advanced Viewing Setup
- Chapter 4 Web-based Management
- Introduction
- Connecting to IVS-100
- Welcome Screen
- Viewing Area
- Control Panel Screen
- Advanced Configuration Area
- IVS-100 Advanced setting Menu
- System Screen
- Camera Screen
- Network Screen
- User Screen
- IP Filter Screen
- FTP Client Screen
- SMTP Screen
- Alarm 1 & Alarm 2 Screen
- Schedule Screen
- Motion Detection Screen
- Time Setting Screen
- Popup Screen
- Firmware upgrade Screen
- Factory Default Screen
- ActiveX Control
- Appendix A Alarm I/O Connector
- Appendix B Troubleshooting
- Appendix C Bandwidth Calculation
- Appendix D Specifications
User
Setup user name, password and login privilege
IP Filter
Setup legal IP address of user login (This func-
tion should be used with function “User” re-
spectively)
System Screen
After entering machine Home screen, click on the System menu, you will see a
screen like the example below.
System Screen
Data - System Screen
System Settings
Serial Number
Product serial number
Camera Name
This displays the name for the IVS-100; camera name is use-
ful while multiple unit installation.
Default frame rate
The default frame rate in IVS-100 is 30fps, the video frame
rate can be adjusted in this menu or on the Control panel
menu
Remote camera
control:
Enable or disable remote control feature in IVS-100
Log
Administrator can check the log information in machine, in-
cluding the Main Info, Appended Info, Operator IP, Operator
MAC, and Time.
Select the “View” button to check the log file.
23