Instruction manual

NVS INSTALLATION

DDNS Registration

For users that have DYNAMIC addressing from their Internet Service Provider (ISP) you will need to

We recommend you determine if you use dynamic addressing and if you do, register your Network Video

Server on our DDNS website FIRST, before you configure, setup, or install the NVS.

You do not need to register with our DDNS if you were supplied a STATIC IP address from your ISP.

The only information that you will need off of the NVS for registration is the serial number located on the

underside label of the NVS.

When you join our DDNS service, you will have to supply an ID and Password, the ID and Password do

NOT have to match the ID and Password logon information used to access your NVS. It is a separate

service with separate logon information.

After joining our DDNS service and configuring the NVS, you will be able to access your cameras in two

ways:

① Go to www.mybluenetvideo.com and select your camera from the list or login

② You may also access it by simply entering a URL of “UserID. mybluenetvideo.com/CameraName”

into your address bar. Replace “UserID” with the UserID you have chosen when registering with

the DDNS service.

L If you have only one camera registered, you do not need to specify the camera name.

etwork Video Server User’s Manual

B01