Instruction manual

 Top View

• Power LED

This red light becomes illuminated when 12V DC power is

supplied to the unit. This indicator should always be lit

when in use. If it is not lit or flashes when power is

supplied, the Video Server is not operating properly.

• Active LED

hen in use, this orange indicator should always be

flashing or flickering. During reboots or power cycling, it

may take several seconds for the unit to initialize and

illuminate the indicator.

• 100M LED

This indicator may flash during a reboot or power cycling,

but should not be lit during normal operation. 100Mbps is

indicated by this light and is currently unavailable.

• 10M LED

This green indicator should be flashing or glowing during

normal operation. During a reboot or power cycling, it ma

take up to 30 seconds to initialize, negotiate your networ

speed, and begin operation at 10Mbps. If this light is not lit

after 30 seconds of operation, check then network cable to

ensure a proper connection. When a proper connection is

met, the green indicator should immediately glow

NVS INSTALLATION

etwork Video Server User’s Manual

B01