Instruction manual

NVS INSTALLATION

Product Description

 Front Panel

 Rear Panel

• Power Supply Connector

Use the power jack to connect your regulated 12V DC

power adapter

• Serial Communication Connector

The 9-pin D-sub connector includes 2-channel serial

communication.

COM1 is typically used for Pan/Tilt Camera and COM2 is

for Digital In/Out

COM1 : RS-485/RS-232C (Option), COM2 : RS-232C

• Network Connector

The server is designed to operate on a 10/100 Mbps

Ethernet network.

Currently the server operates at 10 Mbps until future

upgrades become available

• Video In/Out Connector

Each video input/output is terminated using a coax/BNC

connector. Physical connections are made using RG-59

coaxial video cable; recommended maximum length of 300

feet. These provide the connections for virtually any type o

security camera, CCTV devices, camcorder,

CR, DVR, etc.

Adapters to connect to the BNC are available.

etwork Video Server User’s Manual

B01