Instruction manual

ADMIN TOOL

Control Tool

 Com1 For PTZ devices only. Select the PTZ control protocol.

 Com2 For Digital I/O module only. Select the module type.

 Com1 Type Select the type of COM1 port.

 Com1 Wait Time Wait time for the response after data is sent to PTZ device.

It is important value when COM1 is RS-485 type and bi-directional(full-duplex)

protocol is used. In this case, If this time is too short you can lose the data from

device.

Recommended value is 50 msec in case of RS-485, 200 msec in case of RS-232C.

etwork Video Server User’s Manual

B01