Instruction manual

4
NETWORK SETUP
⑤ Depicted below are several basic network scenarios. Determine which scenario describes your
network. If your network does not match one of the below scenarios and are unsure how to setup
your NVS, please contact your network administrator, then call our Support Center.
L
Dash line box signifies areas of tour network that you can't control.
Only the ISP has access to these devices.
Case A : Dynamic IP or PPPoE + Personal Router [Most SOHO]
Configure your NVS's TCP/IP properties as follows :
 Network Type • STATIC (even though you have Dynamic IP from your ISP, use STATIC on the NVS)
 Internet Address • A private IP address such as 192.168.0.200 [Example]
L You need to assign the NVS an IP address, just as you would assign a PC.
L The IP address you assign must be unique to your network as well as match your
network. For information how to chose a unique IP and match your network
please read the FAQ.
L The IP address you assign the NVS must be a private IP. For information on how
to chose a private IP please read the FAQ
 Subnet Mask • 255.255.255.0 [Example]
L you must use the same subnet mask as the one you noted under “Current TCP/IP
Settings”
N
etwork Video Server User’s Manual
/
B
B01
www.bluenetvideo.com 14/14