User's Manual

2. Panel and Port
2.1. Anchor Front Panel
The diagram and meanings of the product front panel are as follows.
2.2. Anchor Back Panel
The back panel of the Bluetooth AOA Location Anchor is used for installation and
unmounting, as shown in below figure.
Network indicator
Power Indicator
Location indicator
Permanent Green: no tag connection or tag connection failure.
Flashing Green: normal tag connection.
Location Indicator
1
Number Meaning Status Description
2
3
Power Indicator
Network Indicator
Permanent Green: normal power supply.
Permanent OFF: abnormal power supply.
Green when connected through ethernet.
Permanent OFF: no connection or connection failure.
Permanent ON or Blinking: normal network connection.
Label Area
1
Number Meaning Status Description
2
3
Reset Button
RJ45 Port
Multiplexing port for POE power supply input or network
transmission; can connect to a standard POE Switch.
When powered on, press and hold the button for 10
seconds, the anchor will reset to factory default settings and
reboot. All indicators on the front panel flash three times
during reset.
Product ID and information.
RJ45 network port 1
Reset button
Label area
RJ45 network port 2
BlueIOT Anchor User Manual | 32 | BlueIOT Anchor User Manual