User manual

57
7. Open the Log & Capture window and in Clip Settings, enable the appropriate number of embedded audio channels
(11-24).
Screen shot shows 4 selected channels for embedded audio: 11,12,13,14.
8. To prevent capturing silence from the AES channels, disable channels 1 & 2
To capture AES (referring to Picture 7 when AES is set in the Audio/Video Setting capture preset) re-enable 1 & 2
NOTE
We recommend that when capturing embedded audio, you disable the AES and Analogue channels.
Capturing on AES, Analogue and Embedded simultaneously is not supported and are required to be disabled.