User manual

32
Typical Connection Workflow 1
The following example is a typical workflow you might use if your source is SDI but you have analog monitoring for video
and audio and two channels of audio are required.
• SDI video I/O
• Digital XLR audio I/O 4 Channels of Audio
• Analog video and audio monitoring
Your source and master is Digital SDI for video and Digital Audio by AES/EBU XLR.
Your monitoring is Analog component and analog audio.
If your deck supports embedded audio you could I/O the audio via the SDI and monitor the 4 channels via XLR or S/P DIF.
Feature application Settings
• Digital audio routing channels 1 & 2 to Analog left and right
• Analog Video output set to Component
(
DVID 1
)
SDI ‘A’ OUT In
p
ut of Dec
k
Genloc
k
(AVID 1) Y/G/CVBS Output
DIG AUDIO IN 3/4
DIG AUDIO OUT1/2
DIG AUDIO OUT 3/4
DIG AUDIO IN 1/2
ANG AUDIO OUT LEFT
ANG AUDIO OUT RIGHT
Cable Connection Guide
SDI Monitor
Analog Audio
Monitoring