User manual

75
Setting up Premiere Pro 2.0 with Bluefish444
Scratch Disks.
The first thing you are required to do is set up your scratch disk.
This should be your fastest drive configured to support the video and file format you intend to capture and playback your
footage from.
For further information on storage solutions see Appendix C Storage Arrays and Configurations.
Ensure that the preferences settings are correctly setup for you scratch disks and the paths are directed at a valid Media
Disk array that can sustain the data rate for real time playback for HD or SD modes.
You can do this via selecting Edit -> Preferences -> Scratch disks.
Ensure all paths point to your Media array.
Audio
Bluefish444 provides support for 48 KHz uncompressed multi channel audio support via the audio interface of the
Bluefish444 HD and SD product range. All audio playback is output via the Bluefish444 hardware.
Bluefish444 provides full support of Multi channel and surround sound 5.1 audio monitoring. Provides full audio routing
support providing support for channel to track routing.
Enabling the Audio driver.
1. In the Adobe Premiere Pro menu bar select EDIT -> PREFERENCES -> AUDIO HARDWARE.
2. In Audio Hardware section, select the input/output drop down list and select “Bluefish444 ASIO”.
3. Select OK.
Using other sound card devices.
Monitoring through other 3rd party sound cards or devices is not recommended, video and audio sync is not guaranteed