User manual

55
Installing From Previous Installations
1. Close all applications.
2. Uninstall all previous Bluefish4444 Installers.
3. In the Windows Control panel, go to Add or Remove Programs,
4. Uninstall all Bluefish444 installers in the Add remove programs dialog box e.g.; Bluefish444 installer 5.1.9.
5. Follow all on bard prompts.
6. Restart your system.
7. Run the Bluefish444 installer v5.X.X
8. Say yes to all prompts to continue.
9. Select yes to shut down the system if required.
10. If your system does not shut down automatically;
11. Go to “Start” menu button and select “Turn Off Computer”.
12. Select “Turn Off”
to shut down your system.
13. Restart your system.
14. You may under certain circumstances see another “new hardware found” dialog box, this is because the firmware
introduces a new Rev ID, and so to the operating system it is a new device.
15. In the “found new hardware Wizard” dialog box select “install the software automatically” option.
16. Select next.
17. Select “Continue Anyway”
18. Select finish.
19. Launch Symmetry and the Bluefish444 feature application to test your configuration.