User manual

54
Analog Configuration Guide
The SD|Greed supports an array of configurations that can be selected by using the
“Analog output signal type” selector and the “Input signal type” selector.
Numerous combinations are available. In general any of the analog video connectors
that are not used as inputs can be used as outputs. Therefore the table below is
arranged to show which output signal types will be available given the output signal
type that will be used.
For a detailed Color Guide please refer to the SD Greed Cable guide included in your
SD Greed box or refer to this manual “SD|Greed Cable Connection Guide”.
SD|Greed Analog and Digital I/O Configurations and Labeling Guide
Input Type Output Configurations
Digital Analog Set 1 Analog Set 2
SDI
DVID 3 or
DVID 4
SDI Video + Key
SDI Video + Video
Component/RGB
(AVID 1,2,3)
Composite (AVID 4)
S Video (AVID 5,6)
Component
SDI Video + Key
SDI Video + Video
Component/RGB (AVID 1,2,3)
Or
Composite & (AVID 1)
S Video (AVID 2,3)
Input
Component (AVID 4,
5,6)
S Video
SDI Video + Key
SDI Video + Video
Component/RGB (AVID 1,2,3)
Or
Composite (AVID 1) &
S Video (AVID 2,3)
Input
S Video (AVID 5,6)
Composite
SDI Video + Key
SDI Video + Video
Component/RGB (AVID 1,2,3)
Or
Composite (AVID 1) &
S Video (AVID 2,3)
Input
Composite & (AVID 4)