User manual

27
Digital Video I/O & Genlock
SD|Greed supports two SD SDI inputs and three SDI outputs. SD|Greed supports
independent inputs and outputs allowing for a combination of two simultaneous
capture and playback streams.
The Digital video cable can be customized to support a range of SDI dual link and
single link modes. The auxiliary SDI can be either used as a 3rd output which can be
configured to monitor dual link modes as a single link 4:2:2 connection.
SDI inputs and outputs support a total of 16 channels of embedded audio, 8 channels
per SDI
Reference input is BI Level via supported by 1 x BNC Bi level Sync. All card
outputs are unconditionally stable. SDI outputs always meets SMPTE jitter
specifications with or without genlock.
Type Supported Mode Label Cable Color
2 X SDI Inputs
(BNC)
Dual Link 4:4:4, 4:4:4:4
Video + Key, 4:2:2:4
Dual independent, 2 X
4:2:2
DVID 3 SDI “A” In
DVID 4 SDI “B” In
GREEN
BLUE
2 X SDI
Outputs (BNC)
Dual Link 4:4:4,
Video + Key,
Dual independent,
DVID 1 SDI “A” Out
DVID 2 SDI “B” Out
RED
YELLOW
1 X SDI (BNC) SDI Ancillary
Output/input.
DVID 5 SDI “x” Out GREY
Genlock (BNC) Genlock Genlock WHITE
* Feature will be available in future firmware releases
Mini Din male 9 pin
(DVID 1) SDI ‘A’ OUT
(
DVID 2
)
SDI ’B’ OU
T
(
DVID 3
)
SDI ‘A’ IN
(
DVID 4
)
SDI ‘B’ IN
(
DVID 5
)
SDI ‘X’ OU
T
GENLOCK