User manual

Create Range Windows User Manual
22
Capturing with Bluefish444
Bluefish444 hardware allows capturing to:
AVI YUV 8-bit
QuickTime v210 YUV 10-bit
QuickTime 2VUY YUV 8-bit
Cineon RGB 10-bit
DPX RGB 10-bit
TGA RGBA 8-bit
Stereo (2 channels) or 5.1 Surround-Sound (6 channels)
Following the previous steps, capturing or logging can be now started.
1. Select File → Capture (F5 shortcut)
2. At the Logging tab, use the Setup section to select the video and/or audio to capture
3. Type the Tape Name, Clip Name at the Clip Data section (clip Name can not be changed
later)
4. Select the Settings Tab to adjust Video/Audio Settings, capture Locations, and Device
Controls.
5. Select the IN/Out Points of the Material you wish to capture
6. Select Capture IN/OUT, Tape or Log Clip.
Note: For more information on capturing in Premiere Pro refer to the Adobe Premiere Pro User Manual.
Capture Settings:
File Type QuickTime, AVI, DPX, Cineon, TARGA.
Audio channels 2 Channel (Stereo), 6 Channel (5.1
Surround)
Timecode SourceRP188 VITC, RS422, RP188 LTC
Scale To Select a Scaling option that is compatible with
the input Video Signal. Refer to www.bluefish444.com or
Symmetry Manual for details