User manual

Create Range Windows User Manual

Setting Up Premiere Pro CS5

Creating a New Project

Note: Unlike previous Premiere Pro versions, in CS5 the specifications of video mode/format/resolution

are done on sequence settings rather than in the project settings.

To start a new project:

 Open Premiere Pro and select to start a New Project

 Select from the one of Bluefish444 (BF) capture format: (AVI, QuickTime or Sequential)

 From the Setup button next to the drop-down Menu, select

File Type – QuickTime, AVI, DPX, Cineon, TARGA.

Audio channels – 2 Channel (Stereo), 6 Channel (5.1 Surround)

Timecode Source–RP188 VITC, RS422, RP188 LTC

Scale To – Select a Scaling option that is compatible with the input Video Signal.

 From the ‘Scratch Disks’ tab set the files location for capturing and preview.

Note: Scratch Disks - capturing & previewing video and audio files should be set to the highest

performance storage device in order to allow high data rate playback of the media. Please refer to the

hardware manufacture documents.

These settings can be changed later by selecting “Project → Project Settings →Scratch Disk or

General”