User manual

Create Range Windows User Manual
17
Input Signal Type indicates the current signal the card is receiving on the SDI Input source from
the deck or other signal source.
Output Video Mode indicates the current video mode the card is outputting.
Output Video Modeis controlled by the application (e.g. Adobe Premiere Pro, Symmetry, etc)
Video Output Control
This section gives you direct control of the output
signal of your Bluefish444 card. Altering these
settings will allow you to switch between outputting
two video streams on both Outputs (SDI A & SDI B)
or outputting video on SDI A and outputting
key/alpha on SDI B
Timing Adjust
Reference Video Mode displays the input type
that Bluefish444 card is detecting on the
reference source.
Reference Source allows you to select the
reference source as either: Genlock BNC, SDI
link A, SDI link B or Software.
Horizontal adjusts the relative horizontal
timing between the Genlock signal and the
cards output signals.
Vertical adjusts the relative vertical timing between the Genlock signal and the cards output
signals.
Set button commits any changes.
Letter Box - Adjust the image matte (black bars) above and below the image.
Video Input Source - For selecting the video input port (SDI A or B)
Advanced Blanking control - More accurate and fully customize letter box settings. (When
available)
Misc Functions - Safe Picture and Safe Title are for displaying the „safe area‟ of the output
signal.
Audio Tab
Default Audio Input Source allows
you to select the audio input. Available
options are:
AES (digital); Analog; SDI A or SDI B.
Digital Audio  Analog Audio
Routing
Provide the option to monitor specific
digital AES audio channel on analog
speakers.
Embedded Audio Output Setting
Embedded audio channels are grouped
together to be output on SDI A/B.
Select which embedded audio group to
be output.