Product Overview
Table Of Contents
Product
Instructions
Hot
Ground
Neutral
Diagram
Type Speed Amps Watts HP
PUH15-6SFC
HI 0.90 100 1/25
MED 0.70 70 1/25
LOW 0.50 55 1/25
“___” without check valve, “_ _ _” with check valve
PI-0601GY (3 Speed Circulator Pump) Page 2 of 2
Installation Tips
• Ensure system is free from debris that
could damage circulator pump
• Install circulator pump above lowest
point of system to avoid where the sedi-
ment would naturally collect
• Fill and purge system prior to starting
the circulator pump
• Do not get the inside of terminal box wet
Wiring
• Hot lead (typically black wire) to "L"
terminal
• Neutral wire (typically white wire) to "N"
terminalthe circulator pump
• Ground wire (typically green or uninsu-
lated wire) to ground terminal