User's Manual

- 3 -
3. INSTRUCTIONS
3.1 Power ON
1. Under “Power OFF” mode, Press and hold the TALK button for at least 6 seconds until 2
beeps are heard.
2. Green LED flashes 5 times rapidly for a few times.
3. The Bluetooth headset is now turned ON. Green LED will flash once every 3 seconds.
3.2 Power OFF
1. Under “Power ON” mode, Press and hold the TALK button for at least 3 seconds until 2
beeps are heard.
2. Red LED flashes 5 times rapidly for a few times
3.3 Pairing
Before you can use the BEH009, you must pair it first., you need to:
1. Turning the BEH009 Bluetooth headset OFF
2. Press and hold the TALK button for 9 sec. The two LEDs would cross-flash RED/GREEN,
then release the TALK button.
3. Now in pairing mode and is ready to be paired with a Bluetooth-enabled device. (Please
refer to the instructions provided by Bluetooth-enabled device to do the pairing process.)
4. The default passkey of BEH009 is ‘0000’ .
5. When pairing success, Green LED flashes every 3 seconds.
3.4 Answering incoming calls
When a ring tone be heard at the earphone. Press TALK button to answer the call.
3.5 Transfer a call (connect with HandsFree Profile)
During a phone call, hold Volume Up (+) Button and release it when hear a beep sound) to
transfer the call from headset to mobile phone
3.6 Reject a call
During a ring, hold Talk Button and release it when hear a beep sound to reject the call.
3.7 Volume Control
Press Volume Up (+) button to turn the volume up.
Press Volume Down (-) button to turn the volume down.
3.8 Mute/Un-mute the microphone
During a phone call:
z Press and hold both Volume Up (+) and Volume Down (-) button and release them