Datasheet

l Usage using Stereo gateway & Ear set
- Connection
Turn the Ear set & Stereo-gateway on to connect them. If they are paired already they are connected automatically by power on. Connect Stereo-gateway directly to sound
source and listen using Ear set.
-Connection to sound source
Use cable cord connected to IN hole on the stereo gateway to connect to PC, TV or other sound source.
* If cable is not match the TV or other sound source's output then use
adapter supplied or purchase the suitable connection cable.
Indication
l LED indication
Turn on: Green LED blinks four times
Turn off: Red LED blinks four times
Registration procedure: Green and red blinks alternatively
Standby mode: Green LED blinks every five seconds
Calling or Listening to music: Green LED blinks for every seven seconds
Low Battery: Red LED blinks every five seconds.
l Beep indication
Power on: Ding dong ( high -> low)
Power off: Ding dong (low->high)
Ring: Internal ring tone
Low battery: 3 tone every 15 seconds
Connection sound: short 1 tone beep
Cancellation of connection: 2 tone
Connection error: 1 long tone
www.blueears.net