User Manual

- 11 -
IMPORTANT:
To avoid water spillage. Do not move the dehumidifier for
at least three minutes after turning the power off. Before
transporting, be sure to remove the external drain hose,
drain it carefully, and return it to the pocket provided on the
back of the unit.
OPEARTION
 Humidity setting
The factory setting is continuous. The humidity can be set in
the following manner:
1. Press the function key , The humidity setting the
cursor flashing.
2. Press the regulate key to setting the desired humidity
level. Increases or decreases are in increments of 5%.
Adjust humidity is between CO, 25% and 95%.
3. Wait 3 seconds after setting the desired humidity is
completed, the unit will automatic recognition of
numerical.
NOTES:
1. When the adjusting humidity is between 25% and 95%.the
unit will stop working while reaching the setting humidity,
the screen will displays :
NOTE:
The fan will start up 1minute after every
30minutes, It can increase validity of the
humidity sensor. The unit will automate resume
operation after detecting the condition
humidity above the setting humidity.