Full Product Manual

29

Action
Date, stamp, signature
Delivery Service
Check the machine for damage in transport.
q
Where applicable, assembly accompanying components.
q
Check that the machine design corresponds to the
customer order.
q
Check that the right amount of oil is in the engine and transmission.
q
Check that the working equipment is properly set.
q
Check that the drive pulleys are aligned.
q
Check that belts are properly adjusted.
q
Lubricate the machine as described in the lubrication schedule.
q
Check all operating instruments.
q
Check decals and information attached to the unit.
Check the engine speed (RPM), see Technical Data.
q
Check for leakage.
q
Inform the customer about:
The need and advantages of following the service schedule.
q
The need and advantages of leaving the machine for service every
300 hours.
q
The effects of service and maintaining a service journal on the
machine’s resale value.
q
Fill in the sales papers, etc. Delivery service has
been carried out.
No remaining notes.
Certied:
After the rst 20 hours
Change engine oil.
q
Check that belts are properly adjusted.
q
Tighten screws and nuts.
q