User's Manual

BIP-3010 Series

2-1. Charging the Battery

2.Getting Started

A. Connecting/Disconnecting the Battery

To connect the battery:depress the Battery

Connect/Disconnect button and gently

push the battery in until it clicks into place.

To disconnect the battery: depress the

Battery Connect/Disconnect button, hold

the grooves of the battery on each side,

and gently removed it .

B. Charging the Battery: Connect the power plug of the charger to a 220V outlet

To charge the battery separately

Insert the battery into the charging port on the

back of the charger, with the outer

side(connection terminal) side of the battery

facing downwards.

To charge the battery combined with the product

Insert the connector(I/O receptacle) into the

bottom of the product and into the bottom of the

charger.

Caution:

• Applying excessive force to the terminal without the I/O connector properly inserted

may cause damage. Take special care not to connect the terminal to the battery

charger by force.

• Charging the battery combined with the product will cause the charge indicator lamp

light to light up. The indicator is red when the battery is not fully charged, and green

when charging is complete.