User guide

6
Charge Your Q2
Your Q2 has been given an initial partial charge to get you started, but for best results we
recommend you fully charge it using the supplied USB cable and adaptor.
> You should charge the Q2 whenever it announces that the battery is Very Low. The Q2 will
switch itself off automatically when the Q2 battery runs out.
> A full charge takes about 3-4 hours.
> During charging, the indicator light fl ashes red.
> When the light goes white, the charge is complete.
Switching the Q2 On and Off
There is a hardware power switch next to the
charging port on the back of the Q2.
Slide the switch across to turn the Q2 on or off.
Charging
port
Hardware
power switch
(off position)