User Manual

Basic Headset Functions (continued)

15. Disable/Enable the LED indicators: (for night time driving): When your headset is in idle

or standby mode Click Volume and Volume together for 3 seconds. After turning the

headset OFF and back ON, the LED Indicators will be active again by default. Note the LED’s

are turned OFF while a call is active.

16. Z9 Reset: If you have already Paired 3 devices to the Z9 it is not possible to pair another

as the memory is full. If you want to pair with another phone you must reset the headset.

To reset the Z9 to factory settings; while in idle mode (not connected to any device), Click

Volume

and MFB together (3 buttons). The Z9 will refresh its memory,

delete all current pairing information and automatically go into Pairing mode (LED will flash

Blue) ready to pair with a new device.

* To use these functions, your phone/device must support the Bluetooth Handsfree Profile.

The Bluetooth Headset profile will not activate these features of the BlueAnt Z9.