User's Manual

ENGLISH
BlueAnt
17
11. Reconnect: To reconnect your phone to the V1, simply turn the V1 ON. Or with the V1 ON simply press the BAB .
Alternatively, you can use the menu of your Bluetooth phone.
12. Mute/Unmute the microphone. Press and Hold Volume
for 3 seconds during a call.
13. Call Waiting*: While on a call and another incoming call appears, (beep tones dependent on your network) Press and
Hold Volume
and Volume together for 3 seconds. The current call will be placed on Hold and the incoming call
will be answered. To return to the held call, Click Volume
and Volume together again for 3 seconds.
14. Call Conference*: To add a held call to the current conversation, Press and Hold Volume
for 3 seconds
15. Disable/Enable the LED indicators: (for night time driving): When your headset is in idle or standby mode Press and
Hold Volume
and Volume together for 3 seconds. After turning the headset OFF and back ON, the LED Indicators
will be active again by default. Note the LED’s are turned OFF while a call is active.
16.
V1 Reset: If you have already Paired 3 devices to the V1 it is not possible to pair another as the memory is full. If you
want to pair with another phone you must reset the headset. To reset the V1 to factory settings; while in idle mode (not
connected to any device), Click Volume
, Volume and BAB together (3 buttons). The V1 will refresh its
memory, delete all current pairing information and automatically go into Pairing mode (LED will ash Blue) ready to pair
with a new device.
* To use these functions, your phone/device must support the Bluetooth Handsfree Pro le.
The Bluetooth Headset pro le will not activate these features of the BlueAnt V1.