USER MANUAL DUAL DUA AL MIC
V1 USER GUIDE ENGLISH BlueAnt Introduction The BlueAnt V1 voice controlled portable headset utilizes Bluetooth Wireless Technology. It marks the future of Voice Controlled devices. Its voice activated ‘prompt and response’ interface combined with the BlueAnt Voice Isolation Technology™ software, provide the BlueAnt V1 with easy to use revolutionary voice communications. Its dual microphones clear and clean voice input enabling high quality, Noise Suppression, Echo Cancellation and Wind Noise Reduction.
BlueAnt Features of the BlueAnt V1 • • • • • • • • • • • • • • Voice Controlled user interface Two microphones for pure speech Voice Isolation Technology ™ BlueAnt’s revolutionary Digital Signal Processor (DSP) software During a call, users can switch between two Voice Isolation modes – Standard and Max This world class DSP provides echo suppression, noise reduction and wind noise reduction which separates the desired voice signal from background noise enabling crystal clear conversation in even the noisi
What devices work with the V1 Dual Microphone? Your headset is a Bluetooth V2.1 qualified product and supports both the Headset and Handsfree Bluetooth profiles. The V1 can store information and wirelessly interact with up to five different Bluetooth compliant devices (backward and forward compatible), including mobile phones, PDA’s, PC’s / Mac’s or any Bluetooth enabled device that supports Headset profile or Handsfree profile.
BlueAnt Getting Started - Before you can use your headset, you must do the following: 1. Fully charge your headset using one of the chargers provided. 2. Pair your headset with a Bluetooth enabled device, e.g. Cell phone, PDA, Computer Charging Your V1 comes with a built-in rechargeable battery. For first time use, you must fully charge your V1. During charging, the indicator shows a steady Red light. When the battery is fully charged, the Red light will turn off.
Wearing the BlueAnt V1 Push the ear hook through the ear hook hole which sits on the headset clip and adjust its length to fit comfortably on your ear. Ensure that the headset is pointing towards your mouth. You can wear the V1 on left or right ears, but for optimal performance, wear the V1 on the right ear and angle it so that it points towards your mouth. ENGLISH BlueAnt For optimal performance of the V1 headset, angle the headset so that it points towards your mouth.
BlueAnt Swapping and Fitting the Ear Gels The V1 comes with four different Ear gels. The larger rubber ear gel is fitted on the unit already. When trying the different options carefully pull the ear gel off and replace as per below. Rubber Gels Gently lift to remove. Gently press to attach. Push firmly to click into place. Right Ear The rubber ear gels should be placed so that the tip of the rubber is directed into your ear canal. In most case the gel should be spun about 45 degrees from the tie clip.
Foam Gels Gently pull to remove. Gently press to attach. Push firmly to make sure of correct attachment. ENGLISH BlueAnt When inserting the foam ear gels into your ear, first compress the foam around all sides by rolling the tip into a thin round cylinder, then insert into your ear. Hold the V1 in place while the foam expands. This should take around 30 seconds. To reorder Comply™ Foam Tips for BlueAnt™ devices go to www.blueantwireless.
BlueAnt VOICE CONTROL – “Say a command” Step 1: Press the BlueAnt Button (BAB), a voice prompt asks you to “Say a command” Step 2: “What Can I Say” or one of the available commands such as “Call Office”. A voice prompt responds with “Calling Office” Step 3: The BlueAnt V1 then calls your Office. (set to speed dial 3 in your phone) VOICE CONTROL - Getting the best results 1. After the “Say A Command” prompt, speak your command clearly. 2.
VOICE CONTROL – Set up your Speed Dials The V1 uses your phones speed dial list to make calls. To use effectively you are required you to store the associated numbers into each speed dial position on your phone as follows: ENGLISH BlueAnt Note: Call Goog411 is preset to dial Goog411.
BlueAnt VOICE CONTROL – Available Commands The following is a comprehensive list of the commands available in the V1. Pair Me – Puts you phone into pairing mode ready to connect with your phone Teach Me - This menu helps you to understand and use the V1 Try it Now – Takes you through a program which lets you practice the voice commands.
Redial – Calls the number you last dialled Call Back – Calls the last received number Phone Commands – Triggers the Voice Dial function of your cell phone Check Battery – Tells you the status of your battery charge level Am I Connected? – Checks to see if there is a phone connected. If not it will attempt to connect to your phone.
BlueAnt BUTTON ONLY OPERATION To Turn Voice Control ON or OFF Press and Hold Vol +and Vol - for 6 Seconds Pairing Before use, you must pair the headset with your cell phone. Pairing will create a stored connection in both the V1 and your Bluetooth cell phone. Pairing need only be done once, when first connecting to a new phone. The V1 can store pairing information for up to five (5) different Bluetooth devices.
Pairing Procedure (This is an example only and may differ from your phone, but the process will be the same.) 1. First turn the phone OFF and then back ON again to refresh its memory. 2. Bring the mobile phone to about 30cm from the V1 Dual Microphone. 3. Find the Bluetooth menu in your mobile phone. Turn Bluetooth ON. (Check your mobile phone user guide if necessary) 4. With the V1 OFF, Press and Hold the BAB for about 6 seconds. The LED will appear a solid Blue, and then will start flashing.
BlueAnt Basic Headset Functions For easy reference, also see the Button/Function Matrix and the Quick Start Guide. 1. Power ON: Press and Hold the BAB for 3 seconds. The solid Blue LED will light up. If the battery is low a solid Red LED will be displayed. After powering ON, your headset will automatically connect to your last used phone if it is in operating range. If this phone is not range, the V1 will enter idle mode after 60 seconds.
11. Reconnect: To reconnect your phone to the V1, simply turn the V1 ON. Or with the V1 ON simply press the BAB . Alternatively, you can use the menu of your Bluetooth phone. 12. Mute/Unmute the microphone. Press and Hold Volume for 3 seconds during a call. 13. Call Waiting*: While on a call and another incoming call appears, (beep tones dependent on your network) Press and Hold Volume and Volume together for 3 seconds. The current call will be placed on Hold and the incoming call will be answered.
BlueAnt BlueAnt Voice Isolation Technology™ You can switch between two settings of Voice Isolation - STANDARD and MAX. Voice Isolation Standard - For use in normal everyday environments and gives you a natural sounding voice while removing mild noise. Voice Isolation Max Gives you more intelligible voice in a wide variety of high noise environments.
Button Function Matrix V1 Function Button Time Status Standby Mode means connected to a device but not on a call.
BlueAnt Advanced Headset Functions Pairing your headset with multiple Bluetooth devices The V1 will connect to 2 phones at a time but 5 devices can be paired to it. 1. Make sure the last phone used has Bluetooth switched off or is out of range. 2. Follow the procedure in ‘Pairing Procedure’ above for each device you want to pair. Multi-point With Multi-point you can connect two phones to the V1 and answer which ever phone rings. 1.
Further Information Setting up a Phone Profile (different to Bluetooth Profiles) In your phone, set up a Profile with appropriate ringing volumes and keypad tones and select and activate when using with the V1. Some phones can automatically activate a desired profile when connecting to a Car Kit or Headset Accessory. E.g. Go to Enhancement Settings and select a Default Profile to activate when the headset connects.
BlueAnt Specifications 22 General Specification > > > > Bluetooth v2.1 Up to 10 meters RF coverage CE,FCC,BQB, Ctick, RoHS / WEEE Compliant Headset Profile, Hands-Free profile RF Spec. > Carrier Frequency 2.402 ~ 2.480GHz > < 0.1% BER at -80 dBm > 0 ± 4 dBm (Class 2) User Interface > Blue color LED for operation indication. > Red color LED for low battery indication. > Mini USB for Charging battery or F/W upgrade Audio 3GPP with DSP solution Battery type 3.
V1 Bluetooth Headset 1. Is my phone compatible? If your phone has Bluetooth it more than likely supports a Handsfree or Headset Bluetooth profile, and so will work with the V1. Check your phones manual for up to date information. ENGLISH BlueAnt 2. What is the passcode/passkey of the V1? The Passcode for the V1 is “0000”. 3.
BlueAnt 6. I am having trouble pairing a second phone. What can I do? When pairing a second mobile phone, make sure the first is off or out of range. If you cannot connect to a previously paired and connected phone, go to the Bluetooth menu in the phone, select the V1 and Press Connect. Some phones may require this if it is the second device used. You do not have to re-pair the devices just manually connect. 7. Voice dialing is not successful every time.
Help BlueAnt Warranty Process 1. Should you be having difficulties in operation please refer to the online FAQ and support documents, or call us. Our number is on the back page of this manual 2. Check our website for more information, updated manuals and troubleshooting. www.blueantwireless.com 3. Call us and speak to one of the BlueAnt Wireless Customer Service Team We will clarify whether you have a hardware or connection issue. 4.
BlueAnt Disclaimers: This manual is published by BlueAnt. The information contained in this document is subject to change without notice. All rights reserved. The Bluetooth word, mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by BlueAnt is under license. Other trademarks and trade names are those of their respective owners. Please protect your ears. Warning: This headset can reach a maximum volume of 101 decibels.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
FCC Caution 1. The device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation. 2. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 3.
FCC statement in User's Manual (for class B) "Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
BlueAnt Contact BlueAnt: Nth America customercare@myblueant.
