User Manual

ENGLISH

2: Pair the S3 with your Phone

1. Slide the power switch to the ON position.

2. The S3 will announce the available languages. Tap

the

BlueAnt

symbol when you hear your language.

3. The S3 will now talk you through the pairing

process.

4. The pairing code is 0000 (four zeros).

If you select the wrong language: turn off your S3 without completing the pairing. When

you switch it back on your S3 will ask you to select the language again. If this does not

work, reset your S3 and start again (see “Reset the S3” on page 18 for help).

If the S3 does not go into pairing mode: hold down the

BlueAnt

symbol for about 6 seconds.

Slide the switch to power on

then follow the prompts