User Manual

22
Command Description
"Call Information" Use this command to call your local information service.
This command will only work if your Q1 has been supplied to
you with an information service number stored in the "Call
Information" setting on the headset.
"Cancel" Use this command to cancel the current operation.
"Check Battery" Use this command to check the battery level on the headset and
the currently connected phone.
"Go Back" Use this command to return to the main menu from the "Settings
Menu" or "Teach Me" options.
"Ignore" Use this command to reject an incoming call.
Before you can use this command, you must wait for the Q1 to
read out the phone number and ask you whether you want to
answer the call.
You cannot answer or ignore a call with your
voice if you have turned off the "Incoming Call
Function" in the "Settings Menu".
"Pair Me" Use this command to go into pairing mode.
"Phone Commands" Use this command to access your phone's voice dialing feature, if
it has one.
"Redial" Use this command to redial the last number you called on the
currently connected phone.
"What Can I Say?" Use this command to get a list of the currently available
commands. If you are in one of the sub menus, this command will
list the options from that sub menu.
"Switch Headset Off" Use this command to turn the Q1 off. The headset will ask you to
confirm that you want to switch it off.
"Settings Menu"
Use the "Settings Menu" command to access the following options. When you say "Settings Menu"
the Q1 will read out the commands available on the "Settings Menu".
You must wait for the Q1 to finish reading the commands before you can say one of the
commands.