User Manual

20
• Speak louder than any background noise.
• Try changing the Q1's sensitivity level, as described below. This setting determines how
precisely the words that you say need to match the speech patterns that the Q1 has been
configured to recognize.
When the level is set to "High" the commands you give the Q1 will need to match the speech
pattern it is expecting more exactly, while "Low" is less restrictive and will accept your
commands even if they don't precisely match the expected speech pattern.
If you find that the Q1 is not recognizing your voice commands at all, you should change to a
lower sensitivity level.
You may wish to switch to a higher sensitivity level if the Q1 often responds to your voice
commands by carrying out the wrong command.
Changing the Sensitivity Level
1.
With the Q1 switched on, but not currently on a call, click (the BlueAnt button).
2. When the Q1 asks you to "Say a Command", say the command "Settings Menu".
3. The Q1 will now read a list of options. When it finishes, say the command "Sensitivity Level".
4. The Q1 will now tell you the current setting, and ask you whether you want to set the level to
"High", "Medium" or "Low".
5. To change the setting, say either "High", "Medium" or "Low".
Using Multipoint and the iPhone
If you are using multipoint in conjunction with the iPhone, then you must ensure that the iPhone is
the first connected phone. If the iPhone is not the first connected phone, then it will not work properly
with the Q1.