User's Manual

15
to change the ear bud, remove the attached one by gently
lifting it away from the Connect.
Gently press the replacement ear bud onto the Connect and
push it fi rmly to secure it in place.
Using 2 Phones (Multipoint)
Up to 2 devices can connect to the earpiece at the same time. If
either phone rings, you can answer it with the earpiece.
Use the Pair Me command to put your Connect back into
pairing mode to pair another phone. Any currently connected
phone will be disconnected during pairing, so you will need to
reconnect afterwards.
Which Phone is Used for Calls?
When you have two phones connected you can always answer
an incoming call from either phone.
If you initiate a call through the earpiece (for example by saying
Phone Commands) then the call takes place on the primary
phone: the one that connected to the earpiece fi rst.