Instruction Manual

ManualsBrandsBlueAmber ManualsMedical Supplies & EquipmentBlue Amber Non-contact intelligent monitoring pad

Non-contact intelligent monitoring pad instruction

manual

ank you for using the Blue Amber Contact-Free Smart Monitoring Device. Please

read the instructions carefully before using this product, and keep the instructions for

reference.

A、 Components and functions

pilot light、Reset hole、Power Jack、Cooling hole、button 、The power adapter

It is mainly used for heart rate monitoring, respiratory monitoring, sleep apnea

monitoring, body movement monitoring and out of bed monitoring, and alarm when

monitoring data is abnormal.

B、 Indicator light indication

The red light is long and bright

It's connected to the power supply.

The green light is long and bright

WI-FI that is already connected to the

current environment

light

reset hole

supply hub

heat emission

hole

switch

adapter

Summary of content (8 pages)

PAGE 1
Non-contact intelligent monitoring pad instruction manual Thank you for using the Blue Amber Contact-Free Smart Monitoring Device. Please read the instructions carefully before using this product, and keep the instructions for reference.
PAGE 2
Blue light flashing The equipment is running and working normally. Blue light flashes quickly C、 Installation configuration 1、 Product placement Product is in configuration mode Place the guard pad horizontally under the mattress, below the user's neck and below the waist (as close to the heart and lungs as possible, as wide as the shoulders).
PAGE 3
2、 On the main page of WeChat's official account, select "download APP", click "download and install", and complete the operation according to the prompts. 3、 Open your phone, APP, and use your phone number to sign up for a new account. 4、 Log on to the phone APP, and go to the "my" menu, select "bind device" and scan the QR code on the back of the device. Note: the phone should remain connected to the router's WIFI network. Router WIFI need to open 2.4G channel, or 2.
PAGE 4
Note: to add a guardian to the device, go to the Lamper Care APP and select "Guardian list" in "my" options to add the guardian. You do not need to rebind the device again. F、 Basic parameters Type：BA-CFPM-002 weight: 600g size：610*300*250mm storage temperature：-5-50℃ suitable temperature：0-40℃ relative humidity：15-90% power supply：110~240v~50/60hz,5v=2.
PAGE 5
Sleep apnea alarm threshold >10s, or it can be set by itself. （4） Body movement display and measurement Body movement display Flip figures and bar charts Measuring range of body movement Grade 1-5 body dynamic strength Tip-over motion threshold >2h, or it can be set by itself. （5） In-bed / off-bed display and measurement Out of bed alarm display In / out of bed writing Departure alarm threshold >5min, or it can be set by itself.
PAGE 6
A: Need. Please open the phone APP, and click on "Settings", select "change device WiFi access Information", re-scan the QR code of the device, and follow the "D, device binding" operation. Q:Can the device be powered on for a long time or need to be restarted periodically? A: Power up for a long time, but it is recommended that the device power up and the router be turned off and restarted every 7 to 10 days to make sure the network is connected properly.
PAGE 7
2、 Please do not bend with force. 3、 Do not immerse the product in water, or keep away from the source of fire. 4、 Please do not use it as a toy. 5、 Do not modify or disassemble the product by yourself. Only professional technicians are allowed to repair it. 6、 Do not use in strong EMI environment.
PAGE 8
FCC WARNING STATEMENT Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.