Blueair Classic User Manual - 200 series
Before using Blueair Classic 200 series, please read this user manual carefully. Note: There may be local variations of these models.
Overview of unit General 1. 2. 3. 4. Control panel Blue LED Front cover 280i left view with sensor holes 5. 205, 280i right view 6. Air outlet 7. Air inlet (back view) 8. Particle filter, or 9. SmokestopTM filter 10. Kit box - welcome card - user manual - cleaning cloth Blueair 200 series Blueair 200 series air purifiers are Wi-Fi enabled and are available in two models. The 280i models have built-in sensors for PM2.5, VOC, temperature/humidity, and the 205 models with no built-in sensors.
Safety information The Blueair 205 and 280i air purifiers are electrical appliances. Please read the safety instructions before use and take the necessary precautions to reduce the risk of fire, electric shock or injury. The Blueair Limited Warranty applies only if the unit is used according to these instructions. WARNING: Indicates a hazardous situation that, if not avoided, could result in death or serious injury.
Control panel and touch buttons Placing the unit 4 ins 10 cm Place the unit in a location where air can circulate freely in, out and around the unit. Do not place the unit near sources of heat, such as radiators, fireplaces or ovens. The control panel and touch buttons are located under the flip-up lid (see Step 2 “Starting up the unit”). A grey circle around a touch button indicates that it is inactive.
Classic 280i control panel touch buttons Wi-Fi FILTER AUTO VOC PM 2.5 VOC indicator Status blue - from excellent to moderate pollution levels Status orange - from slight to high pollution levels Filters Auto speed Status circle blue - unit is on Status symbol grey - Auto speed OFF Status symbol blue - Auto speed ON PM2.5 indicator Status blue - from excellent to moderate pollution levels.
Changing the filters Care and maintenance IMPORTANT! Always turn off and disconnect the unit from the supply mains before changing filters, cleaning or carrying out maintenance procedures.. Step 1 Step 2 Open the back door. Pull out the filter. We recommend routine cleaning in order to keep your unit in top condition. When changing filters 1. Wipe clean the underside of the lid after removal. 2. Vacuum the air inlet grille from the inside using a soft brush and/or other suitable attachment. 3.
Classic 280i/205 technical specifications* CADR (cfm)**: 180 Room size Pollen Dust Smoke 200 200 279 sq.ft. (26 m2) Air Changes per Hour *** 5 Airflow (Speed 1-2-3) 75-140-220 cfm Size (HxWxD): 21 x 17 x 9 in.
www.blueair.com Blueair AB Danderydsgatan 11 SE-114 26 Stockholm Sweden Tel: +46 8 679 45 00 Fax: +46 8 679 45 45 info@blueair.se Blueair Inc. Suite 1900, 100 N LaSalle Street Chicago, IL 60602 Tel: +1 888 258 3247 Fax: +1 312 727 1153 info@blueair.com 900129_CLA200_EN_UM_REV00 Blueair India Pvt. Ltd. Embassy of Sweden Nyaya Marg, Chanakyapuri New Dehli – 110021 Tel: +91 11 4606 7121 Fax: +91 11 4606 7120 india@blueair.se Blueair (Shanghai) Trading Co. Ltd. Rm 1005 City Gateway No.
