User Manual

ManualsBrandsBlue ManualsPro AudioYeticaster Professional Broadcast Bundle

BLUEDESIGNS.COM

compass

PREMIUM TUBE-STYLE BROADCAST BOOM ARM

QUICK START GUIDE

REV A

Compass is a premium, tube-style desktop boom arm with internal springs and built-in cable

management, making it ideal for broadcast applications including game streaming, podcasting,

voice-over and more. With smooth, quiet operation and a sophisticated on-camera look,

Compass is the perfect boom arm for broadcast mics weighing up to 2.4 pounds,

including Yeti, Yeti Pro and Blackout Spark SL.

Summary of content (4 pages)

PAGE 1
REV A compass PREMIUM TUBE-STYLE BROADCAST BOOM ARM QUICK START GUIDE Compass is a premium, tube-style desktop boom arm with internal springs and built-in cable management, making it ideal for broadcast applications including game streaming, podcasting, voice-over and more. With smooth, quiet operation and a sophisticated on-camera look, BLUEDESIGNS.COM ©2017 Blue Microphones. All rights reserved. Blue Logo Oval are registered trademarks of Blue Microphones, LLC.
PAGE 2
DESKTOP MOUNTING INSTRUCTIONS Mount Compass to your desktop via the included C-clamp: 1 Unscrew the C-clamp and slide it over the side of your desktop, making sure that both the top of the C-clamp and the underside are resting on flat surfaces. Overly rounded or overhanging desktop edges do not make good mounting surfaces. 2 Fixed mounting with the desk-insert bushing (sold separately, see bluedesigns.com) Screw the lower part of the C-clamp until it is tight and secure.
PAGE 3
4 CONNECTING A MICROPHONE Microphones can be connected to Compass via a shock mount, microphone clip or internal threads (if available on the mic). Compass supports shock mounts and mic clips with 3/8” threading, or 5/8” via the included adapter. Microphones can be connected facing up, or suspended upside down from Compass. To connect your microphone: 1 Insert Compass into the desktop C-Clamp from step 3 above.
PAGE 4
FINE-TUNING COMPASS Compass comes pre-adjusted for use with most broadcast microphones like Yeti and Yeti Pro; however, there may be situations where you wish to fine-tune the microphone hold Compass features adjustable friction hinges at each of the pivot points: base, mid-point, and near the microphone mount. For a more firm hold, rotate the thumbscrews at the friction hinges clockwise.