User Manual

SATELLITE | 16

Pairing with a Bluetooth

Device

On ﬁrst use, Satellite will automatically enter Bluetooth

pairing mode. While in pairing mode, the left logo

LED blinks until the unit has paired.

Turn on the Bluetooth

feature on your smartphone or wireless device. Select “Blue Headphone” from the

list of devices. You will hear a series of tones upon successful pairing, and the left logo LED turns solid

then subsequently turns off after 5 seconds.

In the case that no device pairs with Satellite, Satellite remains in pairing mode for 5 minutes after which

Bluetooth

turns off.

Manual Pairing

To manually enter wireless pairing mode, press and hold the Bluetooth

button for 3 seconds (left Earcup).

Press and hold again to disconnect from Bluetooth

Additionally, inserting the included 3.5mm audio cable will automatically disengage Bluetooth

for a

seamless transition to wired listening. Note that if the audio cable is inserted when you power on Satellite,

Bluetooth

will not automatically turn on.

Clearing the Pairing List

The paired device list can keep up to 10 different connected devices. In the case the list becomes full, you

may experience difﬁculties connecting to new devices. In that event, you can reset the list. Enter pairing

mode and hold down the 3 buttons on the right earcup until you hear a beep. The pairing list is now cleared.