User Manual

SATELLITE | 15
Electric Avenue
Charge Satellite with the supplied USB cable by plugging the small end of the cable into the micro-USB
connector on the left earcup. When Satellite is connected via USB to a charging source, battery charging
begins, whether unit is on or off.
Plug the large end of the cable into a USB wall charger or a computer that is powered on. While Satellite
is charging, the power-button LED pulses slowly. The LED turns solid white when the battery is fully
charged. A complete charge takes approximately 3hrs.
It is recommended to charge the battery fully before using Satellite for the first time.
When Satellite has only about 10% battery charge left, the power button LED flashes every second. The
low battery indication continues until the unit is connected via USB for charging, the unit is powered off,
or the battery fully discharges.
ATTENTION! For regional regulatory compliance, an AC to USB adapter is not included with Satellite.
Power Up Satellite
Press and hold the power button on the left earcup for 1 second. The power button LED lights up solid
white when Satellite is powered on. To power off, press and hold the power button on the left earcup for
1 second. The power button LED flashes 5 times rapidly before turning off.