Full Product Manual

32 Foot
Power
Cord
New Low-Prole Base Guard
Included with this pump
page 8 page 9
Your new Submersible Pump is fully assembled and ready to use
Follow these simple instructions to begin the operation of your submersible pump. Be sure to read all the
instructions and warnings before you begin the operation of the pump to help prevent personal injury or
property damage.
1. Set the release end of the discharge hose to the area you want to move the unwanted water.
Be sure to check the area for possible damage/ooding before you begin pump operation.
2. Place your pump in its desired location. Always use the carry handle to transport your pump. NEVER
carry your pump by the cord or hose connection.
3. Plug the cord into an approved electrical outlet (as outlined in this manual) and begin operation.
4. It is recommended that you use the SteadyMate pump guard for your submersible pump when you use
the pump for removing excess water from a swimming pool cover. It will increase the pumps stability and
performance.