Full Product Manual

ManualsBrandsBlue Wave ManualsOtherSuper Dredger 2450 GPH In-Ground Winter Cover Pump with Base

Pump Guard

With Pool Cover Pump Guard included

• Capacity is 1250 or 2450 gallons per hour

• Manual operation

• Assorted adapter ttings included

• 33’ power cord

• Pump guard

• Capacity is 1250 or 2450 gallons per hour

• Manual operation

• Assorted adapter ttings included

• 33’ power cord

• Pump guard

Manual Models

Automatic Models

page 1

Summary of content (6 pages)

PAGE 1
Pump Guard With Pool Cover Pump Guard included Manual Models • Capacity is 1250 or 2450 gallons per hour • Manual operation • Assorted adapter fittings included • 33’ power cord • Pump guard Automatic Models • Capacity is 1250 or 2450 gallons per hour • Manual operation • Assorted adapter fittings included • 33’ power cord • Pump guard page 1
PAGE 2
WARRANTY SUBMERSIBLE PUMP UNIVERSAL INSTRUCTION MANUAL Your submersible pump is guaranteed to be in perfect condition when it leaves our factory. It is warranted against defective materials and workmanship for a period of 12 months from the date of purchase from owner. Congratulations on your purchase of a submersible pump. Your pump has been manufactured to the highest standards of workmanship and materials. It has been engineered to give you many years of exceptional performance.
PAGE 3
ELECTRICAL CONNECTION WARNING SERVICE INSTRUCTIONS WARNING 1. Check your pump label for proper voltage required. Do not connect to voltage other than that shown. The pump can be connected to any shock proof plug (ground fault interrupter circuit) which has been installed according to electrical code. The plug must have a supply voltage of 110V-60 Hz and a circuit of a minimum of 6 amps. 2.
PAGE 4
AUTOMATIC ON/OFF SENSORS Your new Submersible Pump is fully assembled and ready to use START GO-FLOW STOP-FLOW SYSTEM Follow these simple instructions to begin the operation of your submersible pump. Be sure to read all the instructions and warnings before you begin the operation of the pump to help prevent personal injury or property damage. 1. Set the release end of the discharge hose to the area you want to move the unwanted water.
PAGE 5
Your new Submersible Pump is fully assembled and ready to use Follow these simple instructions to begin the operation of your submersible pump. Be sure to read all the instructions and warnings before you begin the operation of the pump to help prevent personal injury or property damage. 32 Foot Power Cord 1. Set the release end of the discharge hose to the area you want to move the unwanted water. Be sure to check the area for possible damage/flooding before you begin pump operation. 2.
PAGE 6
Pump Guard • • • • • Easy Twist-n-Lock Design Removeable Increased Stability Curved Bottom for Uneven Surfaces Multiple Inlet Openings If you plan on using your pump to remove water from a swimming pool cover, our included Pump Guard is designed to add stability and protect your pump from leaves and debris. Easy to twist / lock installation and removal adds even more versatility to your pump.